Data 100

Local Setup

We will still be using datahub as our primary computing environment. This page serves as a guide for alternative environment setup.

In other words: you don’t have to follow these instructions unless you’d like an alternative to datahub.

Contents

OSX

  1. You will need access to the command line. On a Mac, you can open the Terminal by opening Spotlight (Cmd + Space) and typing "Terminal". Alternatively, you can go to your Applications screen and select Terminal (it might be in the folder named "Other")

  2. Homebrew is a package manager for OSX. If you haven’t already, install it by running the following in the command line (copy, paste, and enter):

     # This downloads the Ruby code of the installation script and runs it
 /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

    Verify your installation by making sure brew --version doesn’t error at your terminal.

  3. Download and install Anaconda:

    # Uses curl to download the installation script
curl https://repo.continuum.io/miniconda/Miniconda2-4.5.11-MacOSX-x86_64.sh > miniconda.sh

# Run the miniconda installer (you will need to enter your password)
bash miniconda.sh

  4. Close and restart your terminal.

    Ensure the installation worked by running conda --version.

You may remove the miniconda.sh script now if you’d like.

Click here to continue to the next part of the setup.

Windows

Windows is especially prone to error if you aren’t careful about your configuration. If you’ve already had Anaconda or git installed and can’t get the other to work, try uninstalling everything and starting from scratch.

Installing Anaconda:

  1. Visit the Anaconda website and download the installer for Python 3.7. Download the 64-bit installer if your computer is 64-bit (most likely), the 32-bit installer if not. See this FAQ if you are unsure.

  2. Run the exe file to install Anaconda. Leave all the options as default (install for all users, in the default location). Make sure both of these checkboxes are checked:

    windowsconda01

1) Verify that the installation is working by starting the Anaconda Prompt (you should be able to start it from the Start Menu) and typing python:

windowsconda02

Notice how the python prompt shows that it is running from Anaconda. Now you have conda installed!

From now on, when we talk about the “Terminal” or “Command Prompt”, we are referring to the Anaconda Prompt that you just installed.

Click here to continue to the next part of the setup.

Linux

These instructions assume you have apt-get (Ubuntu and Debian). For other distributions of Linux, substitute the appropriate package manager.

  1. Your terminal program allows you to type commands to control your computer. On Linux, you can open the Terminal by going to the Applications menu and clicking “Terminal”.

  2. Install wget. This is a command-line tool that lets you download files / webpages at the command line.

     sudo apt-get install wget

  3. Download the Anaconda installation script:

    wget -O install_anaconda.sh https://repo.continuum.io/miniconda/Miniconda2-4.5.11-Linux-x86_64.sh

4) Install Anaconda:

    bash install_anaconda.sh

5) Close and restart your terminal.

Ensure the installation worked by running `conda --version`.

You may remove the install_anaconda.sh script now if you’d like.

Click here to continue to the next part of the setup.

Creating your environment

These instructions are the same for OSX, Windows, and Linux.

  1. Download the data100 data100_environment.yml] from the course repository here or:

     # download via curl
 curl https://raw.githubusercontent.com/DS-100/sp20/gh-pages/resources/assets/local_setup/data100_environment.yml > data100_environment.yml

 # OR download via wget
 wget -O data100_environment.yml https://raw.githubusercontent.com/DS-100/sp20/gh-pages/resources/assets/local_setup/data100_environment.yml

This YAML file is what we use to specify the dependencies and packages (and their versions) we wish to install into the conda environment we will make for this class. The purpose of the environment is to ensure that everyone in the course is using the same package versions for every assignment whether or not they are working on datahub. This is to prevent inconsistent behavior due to differences in package versions.

  1. Using the Terminal, navigate to the directory where you downloaded data100_environment.yml. Run these commands to create a new conda environment. Each conda environment maintains its own package versions, allowing us to switch between package versions easily. For example, this class uses Python 3, but you might have another that uses Python 2. With a conda environment, you can switch between those at will.

    # sanity check on conda installation.  Should be 4.5 or higher
conda --version

# update conda just in case it's out of date
# enter y if prompted to proceed
conda update conda

# download git
conda install -c anaconda git

# Create a python 3.6 conda environment with the full set
# of packages specified in environment.yml (jupyter, numpy, pandas, ...)
conda env create -f data100_environment.yml

# Switch to the data100 environment
conda activate data100

# Check if packages are in the environment
# This should not be empty!
conda list

From now on, you can switch to the data100 env with conda activate data100, and switch back to the default env with conda deactivate.

Working on assignments locally

These instructions are the same for OSX, Windows, and Linux.

To work on assignments, you should fetch the assignment on datahub, navigate to the assignment folder and click on the download icon on the top right:

downloadhw

Then you can unzip the files into a folder of your choosing.

Remember the location of your assignment files because you’ll need to navigate to that folder to open the notebook.

Opening notebooks locally

To open Jupyter notebooks, you’ll navigate to parent directory of the assignment in your terminal, activate the environment, and start up a jupyter server. This will look something like:

cd path/to/assignment/directory
conda activate data100
jupyter notebook

This will automatically open the notebook interface in your browser. You can then browse to a notebook and open it.

Make sure to always work in the data100 conda environment when you are using jupyter notebooks for this class. This ensures you have all the necessary packages required for the notebook to run.

Verifying Your Environment

You can tell if you are correct environment if your terminal looks something like:

conda-env

Additionally,

conda env list

outputs a list of all your conda environments, and data100 should appear with a * next to it (the active one).

Removing the environment to start over

If you feel as if you’ve messed up and need to start over, you can remove the environment with

conda remove --name data100 --all

To verify that the environment was removed, in your Terminal window or an Anaconda Prompt, run:

conda info --envs

Which should then no longer display the data100 environment.

Submitting your work

Submissions will still be handled via datahub. To upload your work, navigate to the appropriate assignment folder on datahub and click on the upload button on the top right. Remember to validate, submit, and upload to Gradescope (for homeworks and projects).

uploadhw

FAQ

Shell not properly configured to use conda activate

If you had an older version of Anaconda installed (perhaps for another class), you may see the following message.

conda_activate

Follow the instructions in the prompt to:

  • Enable conda for all users sudo ln -s ...
  • Put the base environment on PATH echo "conda activate" >> ~/.bash_profile". Note that ~/.bash_profile may be something different like ~/.bashrc.
  • Manually remove the line that looks like export PATH="/usr/local/miniconda3/bin:$PATH" from your .bash_profile. Use your favorite plaintext editor to do this (do not use a rich text editor like Microsoft Word!).